Guy
- Total activity 319
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 159
Articles
Recent activity by Guy-
Do I need to charge my new Battery ?
Yes. Charge your new battery for at least 8 hours or overnight before use
-
My Zip X1 top box is flashing
The Zip X1 top box speed number will flash while the X1 is moving. The speed number will return to solid when the X1 is stopped. It is normal for the speed number to flash while the unit is moving.
-
My X1 turns off during the round
A quick tap on the start/stop button is all that is needed to operate your X1 buggy. Do not hold the start/stop button down as you may trigger the buggies “sleep mode” function. Your X1 is fitted w...
-
My battery is connected to my buggy but there is no display on the LCD screen
Please ensure your battery is fully charged. If so, the buggy may need to be taken to an authorized MGI repair center for inspection.
-
My golf bag does not fit onto my buggy
Ensure the handle is locked into the highest position and the top bag support has been lowered into position.
-
When operating the speed control, the speed setting does not change.
Ensure your wheels are on the correct side and they are locked into the drive position.(X1 and X3 only), If this is correct, you may need a replacement speed control.
-
My buggy is running slow
Check your wheels to ensure the Left wheel is on the left side and the right is on the right.(X1 and X3 only), If your buggy is running consistently slow you will need to take it to an authorized ...
-
When operating the buggy, the top box illuminates, the speed settings change but the buggy does not go
Ensure your wheels are on the correct side and they are locked into the drive position.(X1 and X3 only), If this is correct, the buggy may need to be taken to an authorised MGI repair centre for i...
-
My buggy does not turn on properly
Ensure your wheels are on the correct side and they are locked into the drive position. If this is correct, one of you clutches may be seized (X1 and X3 only), your rear wheels should roll forward ...
-
The distance measure is not working
The buggy will need to be taken to an authorized MGI repair center for inspection.